普通人制作了一架飛機模型，在沒有任何航模知識的情況下，難度會更大，我們需要哪些具備哪些知識，什么材料，做到什么程度，都是先要考慮的問題。下面大型航空模型制作廠家先把大概設計部分跟大家分享下：

Ordinary people make a model airplane. Without any knowledge of model airplane, it will be more difficult. What knowledge we need, what materials, and what degree we can achieve are the first questions to consider. The following large-scale aviation model manufacturers will share the general design with you first:

一.機頭

1、 Handpiece

1.在合適高度處垂直于地面搭建圓形框架

1. Set up a circular frame perpendicular to the ground at a proper height

2.根據圓形框架，搭建橫豎兩個主框架

2. According to the circular frame, build two main frames horizontally and vertically

3.按照主框架，將豎的框架按照橫的框架平移，超出圓形框架的部分去掉，制作過程中的空隙留到后補充

3. According to the main frame, the vertical frame shall be translated according to the horizontal frame, and the part beyond the circular frame shall be removed. The gap in the manufacturing process shall be left for later supplement

二.機身

2、 Fuselage

1.機身的制作比較簡單，就按照機頭的模型延長就行，注意留出機尾的空間喲~

1. The production of the fuselage is relatively simple, just extend it according to the model of the nose, and pay attention to leaving space at the tail~

2.按照主框架，將豎的框架按照橫的框架平移，與機體沖突就拆除機體

2. Translate the vertical frame according to the horizontal frame according to the main frame, and remove the body if it conflicts with the body

三、主翼

3、 Main wing

1.要確定起始部位的寬度，然后按照這個寬度開始制作框架，每制作一段距離需要抬高一點

1. Determine the width of the starting part, and then start to make the frame according to this width. Every time a distance is made, it needs to be raised a little

2.起落架

2. Landing gear

3.這種小比例飛機的前起落架一般這樣制作.非常簡單形象。

3. The nose gear of this small scale aircraft is generally made in this way, which is very simple.

六.發動機

6、 Engine

小比例飛機發動機也比較簡單，上面是石英臺階，下面是石臺階

Small proportion of aircraft engines are also relatively simple, with quartz steps above and stone steps below

注意：

be careful:

為了方便查看內飾，飛機模型只建造了半邊，只需要將另一半用一樣的方法填補起來，一架完整的飛機模型就完成了。

In order to view the interior conveniently, only half of the aircraft model is built, and only the other half needs to be filled in the same way, and a complete aircraft model is completed.

我們針對一些特殊模型用途，如：需長期展示或者經常參展的大型模型，制定了更詳細的維護計劃，來我們網站http://z4358.cn關注，了解詳細事項以及注意事項！

We have developed a more detailed maintenance plan for some special models, such as large-scale models that need to be displayed for a long time or frequently participate in exhibitions http://z4358.cn Pay attention to the details and precautions!